- Measure the location you would like to put the shelf
- Measure the shelf and cut it to size
- Using the stud finder determine where the studs are
- If possible put fasteners directly into studs
- Determine the height at witch you would like to hang the shelf and mark it with a pencil
- Using a level make a level line across the mark longer than the shelf
- Put shelf brackets on level line and mark holes with pencil
- Drill holes for fasteners
- Center brackets over holes and hand tighten screws into holes then finish the job with a screw driver
- Place your shelf over the brackets and you are finished
Supplies: shelving unit, fasteners
Tools cordless drill, screwdriver, level, stud finder and drill bits